品牌
生产厂家厂商性质
上海市所在地
过滤除尘器上海霏润机械设备有限公司生产的过滤除尘器是利用微孔超细纤维滤布分离气体和微细粉尘,乃至亚微米尘埃的主要设备。适用于化工、食品、医药、电力、冶金、水泥等行业。按用途可分为气力输送系统用过滤除尘器和料仓顶用过滤除尘器。按结构可分为滤袋式除尘器和滤筒式除尘器,过滤材质主要有纤维、普通毡料、覆膜毡料、聚酯、芳纶、聚酯布、特氟龙、涤纶、丙纶、腈纶以及覆膜滤料。
Dust collector is designed to separate superfine particle or even sub-micron dust from process gas with micropore fiber material.It is widely applied to chemical industries,food,medicine,electric power,metallurgy and concrete industry.Dust Filter can be divided into pneumatic conveying filter and silo filter according to its use .It can be also divided into bag filter and cartridge filter according to structure.Filter material is made of fibre,common felt,felt with Tex,polyester,Nomex,polymer cloth,Teflon,terylene,Plypropylene.
产品特点Product Features:
有效过滤面积可提高2~3倍;降低压差,提高风量;低排放,表面过滤效率成倍增加;
Effectual filter area increase 2~3 times than general. Less pressure drop;Increased air flow;Lower emissions;Double filtration efficiency.
一体式设计,安装检修方便,减少停产时间;缩短过滤元件,减少磨损破漏,延长使用寿命;
Monolithic construction design,easy installation,examination and repair,shorter stopproduct time,smaller filter element,less abrasion failure and longevity of service.
清灰压力要求降低,节省能耗;
Low injection gas press,to save operating cost.
紧凑的设计,减少过滤除尘器占地面积,实现超细粉尘过滤;
Compacts structure for downsizing,be able to process superfine particle.
表面覆膜,导电浸渍聚酯,表面光滑处理可供选择;
Filter material with tectorial membrance,electric conduction polyester dipping treatment;be able to make surface smooth if need.
耐酸碱、耐潮、防粘结。
Resistance to acid and alkali,resistance tomoisture,non-bond on filter surface.
除尘效率:99.99%,特殊要求,针对特殊要求可采用二次高效过滤除尘器;
Filter efficiency:99.99% and if need,can use two times high efficiency filters.
工作温度:普通滤料130℃,高温滤料204℃;
Operating temperature:Common filter material:130℃;Resistance to high temperature filter material: 204℃.
抗破绽力:25kg/C㎡;抗张力:90kg(X),102kg(Y)。
Breaking point: 25kg/C㎡;Stretching resistance: 90kg(X),102kg(Y).
过滤除尘器采用脉冲反吹清灰、振打情灰、声波清灰,其中脉冲反吹式过滤除尘器含脉冲控制仪、电磁阀、喷气管、压差仪、防护装置、视窗等。
Back injection,mechanical shake and acoustic wave can be used in Baghouse operational.The back injection filter components:impulse controller,solenoid valve,nozzle,differential pressure meter,safeguard and sight glass ect.
我们可以根据客户需要,按照客户的要求进行设计。
Wide range of sizes and materials of construction as required