品牌
代理商厂商性质
上海市所在地
进口屏蔽泵(品牌)
进口多级屏蔽泵|进口泥浆分离屏蔽|进口超热型屏蔽泵|进口自吸屏蔽泵|进口管道屏蔽泵|进口保温屏蔽泵|进口化工屏蔽泵|进口立式屏蔽泵|进口微型屏蔽泵
进口屏蔽泵,进口化工屏蔽泵-哪个好-巴赫(BACH)
进口屏蔽泵产品特点：
The characteristics of imported chemical canned pump products:
该产品的电机轴与泵轴采用一体化设计结构，电机转子与泵的叶轮固定在同一根轴上，利用屏蔽套将定、转子隔开，转子在泵送液体中运转，其动力通过定、转子之间的电磁作用传递。电机采用滑动轴承结构，滑动轴承的冷却、润滑及整机冷却靠进入电机的冷却润滑循环液完成。该产品具备屏蔽电泵的所有特点，属于高效节能的高科技环保型产品
1、由于输送液体不会泄漏到外部，故适用于对人体有害的液体、容易爆炸和可燃性液体、贵重液体以及腐蚀性液体；
2、由于不能吸入外部气体，故适用于真空系统运行以及与外部气体接触能变质的液体等；
3、由于无轴封，故适用于系统压力较高的高温和低温液体；
4、由于不需要润滑油，不会污染输送液，并避免了注油麻烦；
5、由于电机和泵为同轴的组合体，体积小，重量轻，不占场地，容易拆卸检查；
6、电机因不冷却风扇，运转噪音小。
进口屏蔽泵产品概述：
Overview of Imported Chemical Canned Pump Products:
屏蔽电泵是泵和电机合二为一的产品，在电机定子内表面和转子外表面各一个特殊金属材料制成的屏蔽套，将它们各自密封填充，不和所输送的液体介质接触，使电机的贴心和绕组不受腐蚀，使定子绕组保持了良好的绝缘性能，加之该泵叶轮和电机同轴相连，结构上只有静密封，保证了所输送液体的一滴不漏，*避免了泄漏对环境造成的污染，真正起到了安全环保的作用隔爆型屏蔽电泵是由屏蔽电动机和泵组成一体的无泄漏泵，主要由泵体、叶轮、定子、转子、前后轴承及推力盘等零部件组成。定子和转子分别用非磁性耐腐蚀薄壁套隔离起来，转子由前后轴承支撑浸在输送介质中，因而不需要任何型式的动密封来防止被输送介质的向外泄漏。 总体而言，屏蔽泵是离心式无密封泵。 屏蔽泵无泄漏，在泵内负压情况下，外界气体不会被吸入，特别适用于真空系统运行；同时它适用于高压、高熔点、高低温介质。屏蔽泵结构紧凑，体积小，重量轻；无冷却风扇、噪声较低，使用范围广，运转可靠，能提供一个相对良好的工作环境。
The shielded electric pump is a product of pump and motor. It is made of a special metal material on the inner surface of the stator and the outer surface of the rotor of the motor. It is sealed and filled separately, and does not contact with the liquid medium conveyed, so that the motor's core and winding are not corroded, so that the stator winding maintains good insulation performance, and the impeller of the pump is coaxially connected with the motor. Only static seal ensures that a drop of the transported liquid does not leak, and completely avoids the pollution caused by leakage to the environment. The flameproof shielded electric pump is a leak-free pump composed of shielded motor and pump. It mainly consists of pump body, impeller, stator, rotor, front and rear bearings and thrust plate. The stator and rotor are separated by non-magnetic corrosion-resistant thin-walled sleeve. The rotor is supported by front and rear bearings immersed in the conveying medium. Therefore, no type of dynamic seal is needed to prevent the leakage
德国巴赫泵（BACH）泵业应用领域：
其业务广泛涉及水电、制浆造纸、金属行业、市政和工业领域的固/液分离以及动物饲料和生物质颗粒，并为上述各行业提供的工厂、设备和服务。其它重要的业务领域还包括自动化和服务业务。
水和污水
灌溉和排水
饮用水和工业用水供应
废水处理
海水淡化工程
防洪（包括圩区排水）
火力发电
冷却水泵
脱硫
泵作水轮机发电
各种工业
制浆造纸
矿业
海上平台
制糖和生物乙醇
海水淡化
淀粉和食品行业
各种工业应用
德国巴赫泵（BACH）泵服务概览：
专业人员的部署
安装和启动
检验
维修、检修、维护
由专家进行的机器早期故障检测评估
咨询和更新改造
性能和振动测量
故障和损伤分析
可行性分析
泵和系统的能源分析
更新改造与修复
我们能通过以下方面让您的工厂达到的标准：
强大的研发专长，
创新方案和前瞻性产品，以及
世界各地训练有素的、高素质的、有经验的人员
享有声望的内部研发机构使我们总能在产品开发上一步
独立的和全面的更新改造方案
完整的套餐-从工厂的计划到拆除
短暂的停机时间得益于协调良好的服务流程
减少维护和修理费用
The flow passage parts of the pump are made of stainless steel and engineering plastics, and the quotation of stainless steel magnetic pump is widely used in petroleum, chemical, pharmaceutical, electroplating, environmental protection, water treatment, national defense and other departments. It is an ideal equipment for transporting inflammable, explosive, toxic and precious liquids. It is a better choice for creating leak-free, pollution-free and civilized enterprises. Applicable temperature is - 30 - 130 degrees. 2. Functions of the Main Parts of Magnetic Pumps
1. Pump impeller: Hydraulic form conforms to API685 standard. It is the main characterization component of the hydraulic performance of the magnetic pump. Stainless steel magnetic pump, whose function is to force the liquid to rotate, so that the mechanical energy of the prime mover can be converted into liquid energy.
2. Pump shaft: It is an important part of bearing impeller and inner rotor and transmitting torque.
3. Sliding bearings, sleeves and thrust discs: they are the supporting and positioning parts of the pump rotor system.
4. Internal and external rotors: The internal and external rotors are used together to form the magnetic transmission parts of the magnetic pump.
5. Isolation sleeve: Isolation sleeve is a component which can completely realize the advantage of no leakage of magnetic pump.
（仅供参考）
