成都电动真空插板阀
- 发布时间：2014/11/4 20:24:50
- 浏览次数：284
电动真空插板阀主要技术性能
适用范围： 105～1.3×10-7Pa
阀门漏率： ≤1.3×10-7Pa.L/S.
适用温度： -30～+150℃
阀门开启时阀板两侧的压差：≤2.7×103Pa.
CCD electric ultra-high vacuum gate valve uses electric device to drive the stem, moving valve disc up and down to make the valve opened or closed. It is used to put through or cut off the airflow in vacuum pipeline. Applicable medium can be pure air and noncorrosive gases.
With signal feedback device.
真空插板阀主要零件材料
阀体、阀板：不锈钢
密封件：氟橡胶、波纹管（轴封）、丁橡胶。
| 适用范围：Applicability | 105～1.3×10-7Pa |
| 阀门漏率：Valve Leak Rate | ≤1.3×10-7Pa.L/S.（DN≤200） ≤6.7×10-7Pa.L/S.（DN≥250） |
| 适用温度：Applicable Temperature | -30～+150℃ |
| 阀门开启时阀板两侧的压差： The differential pressure between the two sides of valve disc upon valve opening: | ≤2.7×103Pa. |
| 电源：Valve of power | 220V/50Hz |
电动真空插板阀主要连接尺寸
上海申弘阀门有限公司主营阀门有：截止阀,电动截止阀,气动截止阀,电动蝶阀,气动蝶阀,电动球阀,气动球阀,电动闸阀,气动闸阀,电动调节阀,气动调节阀，减压阀。
| Model | DN | A | H | D | Do | D1 | D2 | D3 | L | L1 | G | E | n-d | 法兰标准 |
| CC-50 | 50 | 60 | 92 | 89 | 72.4 | 61.6 | 55.6 |
| 515 | 153 | 220 | 124 | 8-M8 | GB6071 |
| CC-63 | 63 | 65 | 105 | 114 | 92.1 | 82.6 | 76.6 |
| 566 | 180 | 220 | 124 | 8-M8 | |
| CC-80 | 80 | 65 | 130 | 130 | 110 | 99 | 93 |
| 603 | 200 | 220 | 124 | 16-M8 | |
| CC-100 | 100 | 70 | 152 | 152 | 130.2 | 120.7 | 114.7 |
| 653 | 267 | 220 | 124 | 16-M8 | |
| CC-150 | 150 | 70 | 202 | 202 | 181 | 171.5 | 165.5 |
| 771 | 350 | 270 | 150 | 20-M8 | |
| CC-200 | 200 | 80 | 251 | 253 | 231.8 | 222.3 | 216.6 |
| 889 | 424 | 270 | 150 | 24-M8 | |
| CC-250 | 250 | 85 | 300 | 314 | 288 | 308 | 275 | 271 | 1127 | 550 | 298 | 200 | 24-M10 | JB5278 |
| CC-300 | 300 | 85 | 352 | 365 | 338 | 353 | 323 | 318 | 1197 | 613 | 298 | 200 | 32-M10 |
|
| CC-320 | 320 | 85 | 372 | 385 | 357 | 379 | 344 | 340 | 1197 | 613 | 298 | 200 | 36-M10 | JB5278 |
| Model | DN | A | H | D | Do | D1 | D2 | D3 | L | L1 | G | E | n-d | 法兰标准 |
| CCD-50 | 50 | 60 | 92 | 89 | 72.4 | 61.6 | 55.6 |
| 515 | 153 | 220 | 124 | 8-M8 | GB6071 |
| CCD-63 | 63 | 65 | 105 | 114 | 92.1 | 82.6 | 76.6 |
| 566 | 180 | 220 | 124 | 8-M8 | |
| CCD-80 | 80 | 65 | 130 | 130 | 110 | 99 | 93 |
| 603 | 200 | 220 | 124 | 16-M8 | |
| CCD-100 | 100 | 70 | 152 | 152 | 130.2 | 120.7 | 114.7 |
| 653 | 267 | 220 | 124 | 16-M8 | |
| CCD-150 | 150 | 70 | 202 | 202 | 181 | 171.5 | 165.5 |
| 771 | 350 | 270 | 150 | 20-M8 | |
| CCD-200 | 200 | 80 | 251 | 253 | 231.8 | 222.3 | 216.6 |
| 889 | 424 | 270 | 150 | 24-M8 | |
| CCD-250 | 250 | 85 | 300 | 314 | 288 | 308 | 275 | 271 | 1127 | 574 | 350 | 200 | 24-M10 | JB5278 |
| CCD-300 | 300 | 85 | 352 | 365 | 338 | 353 | 323 | 318 | 1197 | 613 | 400 | 200 | 32-M10 | |
| CCD-320 | 320 | 85 | 372 | 385 | 357 | 379 | 344 | 340 | 1220 | 613 | 440 | 200 | 36-M10 | JB5278 |
| CCD-400 | 400 | 110 | 456 | 497 | 454 | 480 | 440 | 436 | 1480 | 810 | 536 | 200 | 36-M12 | |
| CCD-500 | 500 | 135 | 595 | 590 | 555 | 580 | 540 | 536 | 1580 | 870 | 640 | 220 | 40-M12 | |
| CCD-630 | 630 | 135 | 690 | 700 | 658 | 680 | 639 | 635 | 1730 | 960 | 780 | 220 | 40-M16 | |
| CCD-800 | 800 | 150 | 880 | 890 | 855 | 880 | 835 | 831 | 1960 | 1100 | 950 | 220 | 60-M16 |